ZHCSJD7C April 2002 – February 2019 SN65LVDT14 , SN65LVDT41
PRODUCTION DATA.
- 1 特性
- 2 應用
- 3 說明
- 4 修訂歷史記錄
- 5 Pin Configuration and Functions
-
6 Specifications
- 6.1 Absolute Maximum Ratings
- 6.2 ESD Ratings
- 6.3 Recommended Operating Conditions
- 6.4 Thermal Information
- 6.5 Receiver Electrical Characteristics
- 6.6 Driver Electrical Characteristics
- 6.7 Device Electrical Characteristics
- 6.8 Receiver Switching Characteristics
- 6.9 Driver Switching Characteristics
- 6.10 Typical Characteristics
- 7 Parameter Measurement Information
- 8 Detailed Description
- 9 Application and Implementation
- 10Power Supply Recommendations
- 11Layout
- 12器件和文檔支持
- 13機械、封裝和可訂購信息
封裝選項
請參考 PDF 數據表獲取器件具體的封裝圖。
機械數據 (封裝 | 引腳)
- PW|20
散熱焊盤機械數據 (封裝 | 引腳)
訂購信息
7 Parameter Measurement Information
Figure 8. Receiver Voltage Definitions Table 1. Receiver Minimum and Maximum Input Threshold Test Voltages
| APPLIED VOLTAGES | RESULTING DIFFERENTIAL
INPUT VOLTAGE |
RESULTING
COMMON-MODE INPUT VOLTAGE |
|
|---|---|---|---|
| VIA | VIB | VID | VIC |
| 1.25 V | 1.15 V | 100 mV | 1.2 V |
| 1.15 V | 1.25 V | –100 mV | 1.2 V |
| 2.4 V | 2.3 V | 100 mV | 2.35 V |
| 2.3 V | 2.4 V | –100 mV | 2.35 V |
| 0.1 V | 0.0 V | 100 mV | 0.05 V |
| 0.0 V | 0.1 V | –100 mV | 0.05 V |
| 1.5 V | 0.9 V | 600 mV | 1.2 V |
| 0.9 V | 1.5 V | –600 mV | 1.2 V |
| 2.4 V | 1.8 V | 600 mV | 2.1 V |
| 1.8 V | 2.4 V | –600 mV | 2.1 V |
| 0.6 V | 0.0 V | 600 mV | 0.3 V |
| 0.0 V | 0.6 V | –600 mV | 0.3 V |
Figure 9. Driver Voltage and Current Definitions 
Figure 10. Receiver Timing Test Circuit 
A. All input pulses are supplied by a generator having the following characteristics: tr or tf ≤ 1 ns, pulse repetition rate (PRR) = 1 Mpps, pulse width = 0.5 ± 0.05 µs. CL includes instrumentation and fixture capacitance within 0,06 m of the D.U.T.
Figure 11. Receiver Timing Test Circuit Waveforms 
Figure 12. Driver VDO Test Circuit 
A. All input pulses are supplied by a generator having the following characteristics: tr or tf ≤ 1 ns, pulse repetition rate (PRR) = 0.5 Mpps, pulse width = 500 ± 10 ns. CL includes instrumentation and fixture capacitance within 0.06 mm of the D.U.T. The measurement of VOC(PP) is made on test equipment with a –3-dB bandwidth of at least 1 GHz.
Figure 13. Test Circuit and Definitions for the Driver Common-Mode Output Voltage 
A. All input pulses are supplied by a generator having the following characteristics: tr or tf ≤ 1 ns, pulse repetition rate (PRR) = 1 Mpps, pulse width = 0.5 ± 0.05 µs. CL includes instrumentation and fixture capacitance within 0.06 mm of the D.U.T.
Figure 14. Test Circuit, Timing, and Voltage Definitions for the Differential Output Signal