亚洲国产久久免费,91性爱视频在线观看 ,国产精品爽爽久久久久久

ZHCSS29R April 2004 – April 2024 TL103W , TL103WA , TL103WB

PRODUCTION DATA

封裝選項

請參考 PDF 數據表獲取器件具體的封裝圖。

機械數據 (封裝 | 引腳)

D|8
DDF|8

散熱焊盤機械數據 (封裝 | 引腳)

訂購信息

5.5 Electrical Characteristics: OP AMP1 (V_REF at Noninverting input)

V_CC+ = 5V, V_CC- = GND, T_A= 25°C (unless otherwise noted)

PARAMETER		TEST CONDITIONS			T_A	MIN	TYP	MAX	UNIT
AMPLIFIER
V_IO	Input offset voltage	V_ICM = 0V		TL103W			±1	±4	mV
				TL103W	Full range			±5
				TL103WA			±0.5	±3.0
				TL103WA	Full range			±5
				TL103WB			±0.3	±2
				TL103WB	Full range			±2.5
αV_IO	Input offset-voltage drift			TL103W/TL103WA	Full range		±7		μV/°C
αV_IO	Input offset-voltage drift			TL103WB	Full range		±2		μV/°C
I_IB	Input bias current (negative input)			TL103W/TL103WA			-20		nA
I_IB	Input bias current (negative input)			TL103WB			-15		nA
A_VD	Large-signal voltage gain	V_CC+ = 15V, R_L = 2k?, V_ICM = 0 V		TL103W/TL103WA			100		V/mV
A_VD	Large-signal voltage gain	V_CC+ = 15V, R_L = 2k?, V_ICM = 0 V		TL103WB			210		V/mV
PSRR	Supply-voltage rejection ratio	V_CC+ = 5V to 30V, V_ICM = 0V		TL103W/TL103WA		65	100		dB
PSRR	Supply-voltage rejection ratio	V_CC+ = 5V to 30V, V_ICM = 0V		TL103WB		99	114		dB
I_O	Output current	V_CC+ = 15V, V_O = 2V, V_ID = 1V	Source			20	40		mA
			Sink	TL103W/TL103WA		10	12
			Sink	TL103WB		10	24
		V_CC+ = 15V, V_O = 0.2V, V_ID = -1V	Sink	TL103W/TL103WA		12	50		μA
		V_CC+ = 15V, V_O = 0.2V, V_ID = -1V	Sink	TL103WB		60	100		μA
I_SC	Short-circuit to GND	V_CC+ = 15V					±40	±68	mA
V_O	Voltage output swing from rail	V_CC+ = 30V, R_L = 2k?	Positive Rail (V_CC+)	TL103W/TL103WA		26	27		V
				TL103W/TL103WA	Full range	26
				TL103WB		27.4	28.3
				TL103WB	Full range	27.4
		V_CC+ = 30V, R_L = 10k?	Positive Rail (V_CC+)	TL103W/TL103WA		27	28
				TL103W/TL103WA	Full range	27
				TL103WB		27.6	28.6
				TL103WB	Full range	27.6
		R_L = 10k?	Negative Rail (V_CC-)				5	20	mV
		R_L = 10k?	Negative Rail (V_CC-)		Full range			20	mV
SR	Slew rate at unity gain	V_CC+ = 15V, C_L = 100pF, R_L = 2k?, V_I = 0.5V to 2V, unity gain		TL103W/TL103WA		0.2	0.4		V/μs
SR	Slew rate at unity gain			TL103WB		0.2	0.5		V/μs
GBW	Gain bandwidth product	V_CC+ = 30V, V_I = 10mV, C_L = 100pF, R_L = 2k?, f = 100kHz		TL103W/TL103WA		0.5⁽¹⁾	0.9		MHz
GBW	Gain bandwidth product	V_CC+ = 36V, V_I = 10mV, C_L = 100pF, R_L = 2k?, f = 100kHz		TL103WB		0.7⁽¹⁾	1.2		MHz
THD	Total harmonic distortion	V_CC+ = 30V, V_O = 2V_PP, C_L = 100pF, R_L = 2k?, f = 1kHz, A_V = 20dB		TL103W/TL103WA			0.02		%
THD	Total harmonic distortion	V_CC+ = 36V, V_O = 2V_PP, C_L = 100pF, R_L = 2k?, f = 1kHz, A_V = 20dB		TL103WB			0.005		%
I_CC	Total supply current, excluding cathode-current reference (both amplifiers)	V_CC+ = 5V, no load		TL103W/TL103WA			0.7	1.2	mA
		V_CC+ = 30V, no load		TL103W/TL103WA	Full range			2
		V_CC+ = 5V, no load		TL103WB			0.55	0.77
		V_CC+ = 36V, no load		TL103WB	Full range			1.35
VOLTAGE REFERENCE
V_ref	Reference Voltage	I_K = 10mA		TL103W		2.482	2.5	2.518	V
				TL103W	Full Range	2.465		2.535	V
				TL103WA/TL103WB		2.489	2.5	2.511	V
				TL103WA/TL103WB	Full Range	2.474		2.526	V
ΔV_ref	Reference input voltage deviation over temperature range	I_K = 10mA		TL103W	Full Range		7	35⁽¹⁾	mV
ΔV_ref	Reference input voltage deviation over temperature range	I_K = 10mA		TL103WA/TL103WB	Full Range		7	26⁽¹⁾	mV
I_min	Minimum cathode current for regulation			TL103W/TL103Wx			0.5	1	mA
I_min	Minimum cathode current for regulation			TL103WB			0.2	1	mA
\|Z_KA\|	Dynamic impedance	I_KA = 1mA to 100mA, f < 1kHz					0.45	0.8	Ω

(1) Not tested in production, limits set by characterization and simulation.

封裝選項

機械數據 (封裝 | 引腳)

散熱焊盤機械數據 (封裝 | 引腳)

訂購信息

5.5 Electrical Characteristics: OP AMP1 (VREF at Noninverting input)

5.5 Electrical Characteristics: OP AMP1 (V_REF at Noninverting input)