LM139-MIL
- Wide Supply Ranges
- Single Supply: 2 V to 36 V
(Tested to 30 V) - Dual Supplies: ±1 V to ±18 V
(Tested to ±15 V)
- Single Supply: 2 V to 36 V
- Low Supply-Current Drain Independent of
Supply Voltage: 0.8 mA (Typical) - Low Input Bias Current: 25 nA (Typical)
- Low Input Offset Current: 3 nA (Typical)
- Low Input Offset Voltage: 2 mV (Typical)
- Common-Mode Input Voltage Range
Includes Ground - Differential Input Voltage Range Equal to Maximum-Rated Supply Voltage: ±36 V
- Low Output Saturation Voltage
- Output Compatible With TTL, MOS, and CMOS
- On Products Compliant to MIL-PRF-38535,
All Parameters Are Tested Unless Otherwise Noted. On All Other Products, Production Processing Does Not Necessarily Include Testing of All Parameters.
The LM139-MIL device consists of four independent voltage comparators that are designed to operate from a single power supply over a wide range of voltages. Operation from dual supplies also is possible, as long as the difference between the two supplies is 2 V to 36 V, and VCC is at least 1.5 V more positive than the input common-mode voltage. Current drain is independent of the supply voltage. The outputs can be connected to other open-collector outputs to achieve wired-AND relationships.
The LM139-MIL device is characterized for operation over the full military temperature range of –55°C to +125°C.
技術文檔
類型 | 標題 | 下載最新的英語版本 | 日期 | |||
---|---|---|---|---|---|---|
* | 數據表 | LM139-MIL Quad Differential Comparators 數據表 | PDF | HTML | 2017年 6月 20日 | ||
* | SMD | LM139-MIL SMD 77008012A | 2016年 6月 21日 | |||
電子書 | The Signal e-book: 有關運算放大器設計主題的博客文章匯編 | 英語版 | 2018年 1月 31日 |
設計和開發
如需其他信息或資源,請點擊以下任一標題進入詳情頁面查看(如有)。
PSPICE-FOR-TI — PSpice? for TI 設計和仿真工具
借助?PSpice for TI 的設計和仿真環境及其內置的模型庫,您可對復雜的混合信號設計進行仿真。創建完整的終端設備設計和原型解決方案,然后再進行布局和制造,可縮短產品上市時間并降低開發成本。?
在?PSpice for TI 設計和仿真工具中,您可以搜索 TI (...)
TINA-TI — 基于 SPICE 的模擬仿真程序
TINA-TI 安裝需要大約 500MB。直接安裝,如果想卸載也很容易。我們相信您肯定會愛不釋手。
TINA 是德州儀器 (TI) 專有的 DesignSoft 產品。該免費版本具有完整的功能,但不支持完整版 TINA 所提供的某些其他功能。
如需獲取可用 TINA-TI 模型的完整列表,請參閱:SpiceRack - 完整列表
需要 HSpice (...)
封裝 | 引腳 | CAD 符號、封裝和 3D 模型 |
---|---|---|
CDIP (J) | 14 | Ultra Librarian |
CFP (W) | 14 | Ultra Librarian |
LCCC (FK) | 20 | Ultra Librarian |
訂購和質量
- RoHS
- REACH
- 器件標識
- 引腳鍍層/焊球材料
- MSL 等級/回流焊峰值溫度
- MTBF/時基故障估算
- 材料成分
- 鑒定摘要
- 持續可靠性監測
- 制造廠地點
- 封裝廠地點
推薦產品可能包含與 TI 此產品相關的參數、評估模塊或參考設計。