SN74CBTLV3861-Q1
- Qualified for Automotive Applications
- 5-
Switch Connection Between Two Ports
- Rail-to-Rail Switching on Data I/O Ports
- Ioff Supports Partial-Power-Down Mode Operation
- Flowthrough Architecture Optimizes PCB Layout
- Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
The SN74CBTLV3861 provides ten bits of high-speed bus switching. The low on-state resistance of the switch allows connections to be made with minimal propagation delay.
The device is organized as one 10-bit bus switch. When output enable (OE) is low, the 10-bit bus switch is on, and port A is connected to port B. When OE is high, the switch is open, and the high-impedance state exists between the two ports.
This device is fully specified for partial-power-down applications using Ioff. The Ioff feature ensures that damaging current will not backflow through the device when it is powered down. The device has isolation during power off.
To ensure the high-impedance state during power up or power down, OE\ should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
技術文檔
設計和開發
如需其他信息或資源,請點擊以下任一標題進入詳情頁面查看(如有)。
LEADED-ADAPTER1 — 表面貼裝轉 DIP 接頭適配器,用于快速測試 TI 的 5、8、10、16 和 24 引腳引線式封裝。
EVM-LEADED1 電路板可用于對 TI 的常見引線式封裝進行快速測試和電路板試驗。? 該電路板具有足夠的空間,可將 TI 的 D、DBQ、DCT、DCU、DDF、DGS、DGV 和 PW 表面貼裝封裝轉換為 100mil DIP 接頭。?????
封裝 | 引腳 | CAD 符號、封裝和 3D 模型 |
---|---|---|
TSSOP (PW) | 24 | Ultra Librarian |
訂購和質量
- RoHS
- REACH
- 器件標識
- 引腳鍍層/焊球材料
- MSL 等級/回流焊峰值溫度
- MTBF/時基故障估算
- 材料成分
- 鑒定摘要
- 持續可靠性監測
- 制造廠地點
- 封裝廠地點
推薦產品可能包含與 TI 此產品相關的參數、評估模塊或參考設計。