ZHCS247C May 2011 – April 2018 TPS61260 , TPS61261
PRODUCTION DATA.
- 1 特性
- 2 應用
- 3 說明
- 4 修訂歷史記錄
- 5 Pin Configuration and Functions
- 6 Specifications
- 7 Parameter Measurement Information
- 8 Detailed Description
- 9 Application and Implementation
- 10Power Supply Recommendations
- 11Layout
- 12器件和文檔支持
- 13機械、封裝和可訂購信息
封裝選項
機械數據 (封裝 | 引腳)
- DRV|6
散熱焊盤機械數據 (封裝 | 引腳)
- DRV|6
訂購信息
9.2.1.2.1 Inductor Selection
To properly configure the TPS6126x devices, an inductor must be connected between the VIN pin and the L pin. Equation 3 is used to estimate the minimum inductance value for accurate average output current regulation; the inductor current should be continuous.
In Equation 3, the minimum inductance value required for accurate average output current regulation is calculated. VIN is the input voltage. For typical applications which require voltage regulation, the recommended inductor value is 4.7 μH. Applications with higher inductance values have lower light load efficiency. The recommended range for the inductor value is from 2.2 μH up to 22 μH. The current rating required for this inductor is ILIM and depends on the programmed output current IOUT. Please refer to the Electrical Characteristics. Table 3 contains a list of inductors recommended for the TPS6126x:
Table 3. List of Inductors
| VENDOR | INDUCTOR SERIES |
|---|---|
| Murata | LQM2HP_G0 |
| Toko | DFE252012C |
| Hitachi Metals | KSLI-252010AG |